| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Output signal | analogue signal; IO-Link | ||||||||
| Measuring range |
| ||||||||
| Process connection | threaded connection G 1/2 external thread sealing cone | ||||||||
| Application | |||||||||
| Special feature | Gold-plated contacts | ||||||||
| Measuring element | ceramic-capacitive pressure measuring cell | ||||||||
| Application | food and beverage industry | ||||||||
| Media | viscous media and liquids with suspended particles; liquids and gases | ||||||||
| Conditionally suitable for | use in gases at pressures > 25 bar only on request | ||||||||
| Medium temperature [°C] | -25…125; (< 1 h: 150) | ||||||||
| Min. bursting pressure |
| ||||||||
| Pressure rating |
| ||||||||
| Vacuum resistance [mbar] | -1000 | ||||||||
| Type of pressure | relative pressure | ||||||||
| No dead space | yes | ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 18…30 DC | ||||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Integrated watchdog | yes | ||||||||
| 2-wire | |||||||||
| Current consumption [mA] | 3.5…21.5 | ||||||||
| Power-on delay time [s] | < 1 | ||||||||
| 3-wire | |||||||||
| Current consumption [mA] | < 45 | ||||||||
| Power-on delay time [s] | < 0.5 | ||||||||
| Outputs | |||||||||
| Total number of outputs | 2 | ||||||||
| Output signal | analogue signal; IO-Link | ||||||||
| Analogue current output [mA] | 4…20; (scalable; 1:5) | ||||||||
| Max. load [Ω] | 700; (Ub = 24 V; (Ub – 9 V) / 21.5 mA) | ||||||||
| Short-circuit proof | yes | ||||||||
| Overload protection | yes | ||||||||
| Measuring/setting range | |||||||||
| Measuring range |
| ||||||||
| Analogue start point |
| ||||||||
| Analogue end point |
| ||||||||
| In steps of |
| ||||||||
| Factory setting |
| ||||||||
| Temperature monitoring | |||||||||
| Measuring range [°C] | -25…150 | ||||||||
| Measuring range [°F] | -13…302 | ||||||||
| Accuracy / deviations | |||||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | ||||||||
| Characteristics deviation [% of the span] | < ± 0,5 (DIN EN 61298-2); (incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1) | ||||||||
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) | ||||||||
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) | ||||||||
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) | ||||||||
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,1 (-25…85 °C); < ± 0,3 (85…150 °C) | ||||||||
| Temperature coefficient span [% of the span / 10 K] | < ± 0,1 (-25…85 °C); < ± 0,3 (85…150 °C) | ||||||||
| Temperature monitoring | |||||||||
| Accuracy [K] | ± 2.5 K + (0.045 x (ambient temperature – medium temperature)) | ||||||||
| Response times | |||||||||
| Damping for the analogue output dAA [s] | 0…4 | ||||||||
| 2-wire | |||||||||
| Step response time analogue output [ms] | 30 | ||||||||
| 3-wire | |||||||||
| Step response time analogue output [ms] | 7 | ||||||||
| Temperature monitoring | |||||||||
| Dynamic response T05 / T09 [s] | < 10 / < 25; (DIN EN 60751 water; > 0,9 m/s) | ||||||||
| Interfaces | |||||||||
| Communication interface | IO-Link | ||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||
| IO-Link revision | 1.1 | ||||||||
| SDCI standard | IEC 61131-9 | ||||||||
| Profiles | Smart Sensor ED2: Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A) | ||||||||
| SIO mode | no | ||||||||
| Required master port type | A; (when pin 2 not connected: B) | ||||||||
| Min. process cycle time [ms] | 4.5 | ||||||||
| IO-Link resolution pressure [bar] | 0.01 | ||||||||
| IO-Link resolution temperature [K] | 0.2 | ||||||||
| IO-Link process data (cyclical) |
| ||||||||
| IO-Link functions (acyclical) | application specific tag; internal temperature | ||||||||
| Supported DeviceIDs |
| ||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | -25…80 | ||||||||
| Storage temperature [°C] | -40…100 | ||||||||
| Protection | IP 67; IP 68; IP 69K | ||||||||
| Mechanical data | |||||||||
| Weight [g] | 252.1 | ||||||||
| Materials | stainless steel (1.4404 / 316L); PTFE; FKM | ||||||||
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PEEK; PTFE | ||||||||
| Min. pressure cycles | 100 million | ||||||||
| Tightening torque [Nm] | 20 | ||||||||
| Process connection | threaded connection G 1/2 external thread sealing cone | ||||||||
| Remarks | |||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||||||
