| Product characteristics | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Electrical design | PNP/NPN; (parameterisable) | ||||||||||
| Communication interface | IO-Link | ||||||||||
| Dimensions [mm] | 250 x 28 x 16.7 | ||||||||||
| Application | |||||||||||
| Media | dry bulk material; aqueous solutions; oils | ||||||||||
| Cannot be used for | highly adhesive media | ||||||||||
| Electrical data | |||||||||||
| Operating voltage [V] | 10…30 DC; (IO-Link: 18…30 DC) | ||||||||||
| Current consumption [mA] | < 50 | ||||||||||
| Protection class | III | ||||||||||
| Reverse polarity protection | yes | ||||||||||
| Max. power-on delay time [ms] | 1300 | ||||||||||
| Inputs / outputs | |||||||||||
| Number of inputs and outputs | Number of digital outputs: 3 | ||||||||||
| Outputs | |||||||||||
| Electrical design | PNP/NPN; (parameterisable) | ||||||||||
| Number of digital outputs | 3 | ||||||||||
| Permanent current rating of switching output DC [mA] | 200 | ||||||||||
| Max. resistance switching output [Ω] | 8 | ||||||||||
| Short-circuit protection | yes | ||||||||||
| Type of short-circuit protection | pulsed | ||||||||||
| Overload protection | yes | ||||||||||
| Detection zone | |||||||||||
| Measuring range [mm] | < 200 | ||||||||||
| Measuring/setting range | |||||||||||
| Detection range [mm] | 228 | ||||||||||
| Set point SP [%] | 5…95 | ||||||||||
| Reset point rP [%] | 4…94 | ||||||||||
| In steps of [%] | 1 | ||||||||||
| Accuracy / deviations | |||||||||||
| Repeatability [% of the final value] | 2 | ||||||||||
| Offset deviation [% of the final value] | 4 | ||||||||||
| Resolution [% of the final value] | 1 | ||||||||||
| Linearity deviation [% of the final value] | 1 | ||||||||||
| Response times | |||||||||||
| Response time [ms] | 1300 | ||||||||||
| Software / programming | |||||||||||
| Parameter setting options | Damping; hysteresis / window; fault indication; diagnostic function; sensitivity; internal temperature; limitation of measuring range; adjustable switching delay; zero-point calibration; direction of installation; LEDs can be deactivated | ||||||||||
| Interfaces | |||||||||||
| Communication interface | IO-Link | ||||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||||
| IO-Link revision | 1.1 | ||||||||||
| SDCI standard | IEC 61131-9 | ||||||||||
| Profiles | Digital Measuring Sensor Profile, Common Profile | ||||||||||
| SIO mode | yes | ||||||||||
| Required master port type | A | ||||||||||
| Process data analogue | 1 | ||||||||||
| Process data binary | 3 | ||||||||||
| Min. process cycle time [ms] | 9.6 | ||||||||||
| IO-Link process data (cyclical) |
| ||||||||||
| IO-Link functions (acyclical) | direction of installation; limitation of sensor elements; sensitivity; minimum recognition threshold; Performance in case of a fault; error delay; Damping; LED_Modus; switch-on cycle counter; operating hours counter; switching cycles counter; min./max. process value; internal temperature; min./max. internal temperature; diagnostic data for level | ||||||||||
| Supported DeviceIDs |
| ||||||||||
| Note |
| ||||||||||
| Operating conditions | |||||||||||
| Applications | DIN EN 60654-1 application class B2 | ||||||||||
| Ambient temperature [°C] | -20…80 | ||||||||||
| Storage temperature [°C] | -25…85 | ||||||||||
| Protection | IP 65; IP 67 | ||||||||||
| Mechanical data | |||||||||||
| Weight [g] | 377.5 | ||||||||||
| Dimensions [mm] | 250 x 28 x 16.7 | ||||||||||
| Materials | PBT; PC; | ||||||||||
| Displays / operating elements | |||||||||||
| Display |
| ||||||||||
| Accessories | |||||||||||
| Accessories (optional) |
| ||||||||||
| Remarks | |||||||||||
| Remarks |
| ||||||||||
| Pack quantity | 1 pcs. | ||||||||||
| Electrical connection | |||||||||||
| Connection | Connector: 1 x M12 | ||||||||||
| Electrical connection – plug | |||||||||||
| Cable: 0.1 m, PUR | |||||||||||
