| Product characteristics | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | |||||||||
| Measuring range |
| |||||||||
| Process connection | Clamp DN50 (2″) DIN 32676 (ISO 2852) | |||||||||
| Application | ||||||||||
| Special feature | Gold-plated contacts | |||||||||
| Application | food and beverage industry | |||||||||
| Media | viscous media and liquids with suspended particles; liquids and gases | |||||||||
| Medium temperature [°C] | -25…200 | |||||||||
| Min. bursting pressure |
| |||||||||
| Pressure rating |
| |||||||||
| Type of pressure | relative pressure; vacuum | |||||||||
| Electrical data | ||||||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | |||||||||
| Protection class | III | |||||||||
| Reverse polarity protection | yes | |||||||||
| Integrated watchdog | yes | |||||||||
| 2-wire | ||||||||||
| Operating voltage [V] | 20…32 DC | |||||||||
| Current consumption [mA] | 3.6…21 | |||||||||
| Power-on delay time [s] | 1 | |||||||||
| 3-wire | ||||||||||
| Operating voltage [V] | 18…32 DC | |||||||||
| Current consumption [mA] | < 45 | |||||||||
| Power-on delay time [s] | 0.5 | |||||||||
| Inputs / outputs | ||||||||||
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | |||||||||
| Outputs | ||||||||||
| Total number of outputs | 2 | |||||||||
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | |||||||||
| Electrical design | PNP/NPN | |||||||||
| Number of digital outputs | 2 | |||||||||
| Output function | normally open / normally closed; (parameterisable) | |||||||||
| Number of analogue outputs | 1 | |||||||||
| Analogue current output [mA] | 4…20, invertible; (scalable) | |||||||||
| Short-circuit protection | yes | |||||||||
| Type of short-circuit protection | pulsed | |||||||||
| Overload protection | yes | |||||||||
| 2-wire | ||||||||||
| Max. load [Ω] | 300 | |||||||||
| 3-wire | ||||||||||
| Max. voltage drop switching output DC [V] | 2 | |||||||||
| Permanent current rating of switching output DC [mA] | 250 | |||||||||
| Switching frequency DC [Hz] | 125 | |||||||||
| Max. load [Ω] | (Ub – 10 V) / 20 mA | |||||||||
| Measuring/setting range | ||||||||||
| Measuring range |
| |||||||||
| Set point SP |
| |||||||||
| Reset point rP |
| |||||||||
| Analogue start point |
| |||||||||
| Analogue end point |
| |||||||||
| In steps of |
| |||||||||
| Factory setting |
| |||||||||
| Accuracy / deviations | ||||||||||
| Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) | |||||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | |||||||||
| Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) | |||||||||
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) | |||||||||
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) | |||||||||
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) | |||||||||
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,3; (0…200 °C) | |||||||||
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0…200 °C) | |||||||||
| Response times | ||||||||||
| Damping for the switching output dAP [s] | 0…30 | |||||||||
| Damping for the analogue output dAA [s] | 0.01…99.99 | |||||||||
| 2-wire | ||||||||||
| Step response time analogue output [ms] | 45 | |||||||||
| 3-wire | ||||||||||
| Min. response time of switching output (dAP) [ms] | 3 | |||||||||
| Step response time analogue output [ms] | 7 | |||||||||
| Interfaces | ||||||||||
| Communication interface | IO-Link | |||||||||
| Transmission type | COM2 (38,4 kBaud) | |||||||||
| IO-Link revision | 1.0 | |||||||||
| SDCI standard | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 | |||||||||
| Profiles | no profile | |||||||||
| SIO mode | yes | |||||||||
| Required master port type | A | |||||||||
| Process data analogue | 1 | |||||||||
| Process data binary | 2 | |||||||||
| Min. process cycle time [ms] | 2.3 | |||||||||
| Supported DeviceIDs |
| |||||||||
| Operating conditions | ||||||||||
| Ambient temperature [°C] | -25…80 | |||||||||
| Note on ambient temperature |
| |||||||||
| Ambient temperature [°C] | -25…65 | |||||||||
| Note on ambient temperature |
| |||||||||
| Storage temperature [°C] | -25…100 | |||||||||
| Protection | IP 67; IP 68; IP 69K | |||||||||
| Mechanical data | ||||||||||
| Weight [g] | 1047.5 | |||||||||
| Materials | stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA | |||||||||
| Materials (wetted parts) | stainless steel (1.4435 / 316L) | |||||||||
| Min. pressure cycles | 10 million | |||||||||
| Process connection | Clamp DN50 (2″) DIN 32676 (ISO 2852) | |||||||||
| Surface characteristics Ra/Rz of the wetted parts | < 0.38 / – | |||||||||
| Fill fluid for pressure transfer | NEOBEE (food grade, FDA compliant) | |||||||||
| Diaphragm diameter [mm] | 47.5 | |||||||||
| Displays / operating elements | ||||||||||
| Display |
| |||||||||
| Display unit | mbar; kPa; psi; inH2O; mWS; % of the span | |||||||||
| Remarks | ||||||||||
| Pack quantity | 1 pcs. | |||||||||
| Electrical connection | ||||||||||
| Connector: 1 x M12; Contacts: gold-plated | ||||||||||
