| Product characteristics | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Output signal | switching signal | ||||||||||
| Measuring range [bar] | 0…100 | ||||||||||
| Process connection | threaded connection G 1/4 internal thread | ||||||||||
| Application | |||||||||||
| Special feature | Gold-plated contacts | ||||||||||
| Application | for industrial applications | ||||||||||
| Media | liquids and gases | ||||||||||
| Conditionally suitable for | use in gases at pressures > 25 bar only on request | ||||||||||
| Medium temperature [°C] | -25…80 | ||||||||||
| Min. bursting pressure [bar] | 650 | ||||||||||
| Pressure rating [bar] | 300 | ||||||||||
| Type of pressure | relative pressure | ||||||||||
| Electrical data | |||||||||||
| Operating voltage [V] | 18…30 DC | ||||||||||
| Current consumption [mA] | < 90 | ||||||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||||||
| Protection class | III | ||||||||||
| Reverse polarity protection | yes | ||||||||||
| Power-on delay time [s] | 0.2 | ||||||||||
| Integrated watchdog | yes | ||||||||||
| Inputs / outputs | |||||||||||
| Number of inputs and outputs | Number of digital outputs: 2 | ||||||||||
| Inputs | |||||||||||
| Analogue input (current) [mA] | 0…20 | ||||||||||
| Max. load [Ω] | 300 | ||||||||||
| Analogue input (voltage) [V] | 0…10 | ||||||||||
| Min. load resistance [Ω] | 90000 | ||||||||||
| Outputs | |||||||||||
| Total number of outputs | 2 | ||||||||||
| Output signal | switching signal | ||||||||||
| Electrical design | PNP/NPN | ||||||||||
| Number of digital outputs | 2 | ||||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||||||
| Permanent current rating of switching output DC [mA] | 250 | ||||||||||
| Switching frequency DC [Hz] | < 170 | ||||||||||
| Short-circuit protection | yes | ||||||||||
| Type of short-circuit protection | pulsed | ||||||||||
| Overload protection | yes | ||||||||||
| Measuring/setting range | |||||||||||
| Measuring range [bar] | 0…100 | ||||||||||
| Set point SP [bar] | -24.6…100 | ||||||||||
| Note on setpoint SP |
| ||||||||||
| Reset point rP [bar] | -25…99.6 | ||||||||||
| Note on setpoint SP |
| ||||||||||
| In steps of [bar] | 0.2 | ||||||||||
| Accuracy / deviations | |||||||||||
| Characteristics deviation [% of the final value] | < ± 0,6 | ||||||||||
| Temperature drift per 10 K | < ± 0.3 | ||||||||||
| Characteristics deviation analogue input | < ± 0.3 | ||||||||||
| Temperature drift analogue input per 10 K | < ± 0.1 | ||||||||||
| Temperature drift analogue input [°C] | 0…80 | ||||||||||
| Response times | |||||||||||
| Response time [ms] | < 3 | ||||||||||
| Delay time programmable dS, dr [s] | 0, 0,1…50 | ||||||||||
| Damping for the switching output dAP [s] | 0…4 | ||||||||||
| Software / programming | |||||||||||
| Adjustment of the switch point | programming button | ||||||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/voltage input; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit | ||||||||||
| Operating conditions | |||||||||||
| Ambient temperature [°C] | -25…80 | ||||||||||
| Storage temperature [°C] | -40…100 | ||||||||||
| Protection | IP 67 | ||||||||||
| Mechanical data | |||||||||||
| Weight [g] | 291.5 | ||||||||||
| Materials | stainless steel (1.4305 / 303); PBT; PC; PA; FKM | ||||||||||
| Materials (wetted parts) | stainless steel (1.4305 / 303); ceramics; FKM | ||||||||||
| Min. pressure cycles | 100 million | ||||||||||
| Process connection | threaded connection G 1/4 internal thread | ||||||||||
| Restrictor element integrated | no (can be retrofitted) | ||||||||||
| Displays / operating elements | |||||||||||
| Display |
| ||||||||||
| Display unit | bar; psi; MPa | ||||||||||
| Remarks | |||||||||||
| Pack quantity | 1 pcs. | ||||||||||
| Electrical connection | |||||||||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||||||||
