You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Số điện thoại : +84868571999 / Chat Zalo

Email: infor@nextcom.asia

Thời gian làm việc: 8:00 - 17:00 (Thứ 2 - Thứ 7)

Tài khoản
    Cảm biến áp suất IFM PV7603 -1…25 bar

    Cảm biến áp suất IFM PV7603 -1…25 bar

    5,143,000₫
    cam-bien-laser-ifm-pv7603
    IFM ,
    Thêm giỏ hàng
    Sản phẩm hết hàng
    Product characteristics
    Output signal switching signal; IO-Link; (configurable)
    Measuring range
    -1…25 bar -14.6…362.6 psi -0.1…2.5 MPa
    Process connection threaded connection 1/4″ NPT external thread internal thread:M5
    Application
    Measuring element metallic thin film cell
    Application for industrial applications
    Media liquids and gases
    Medium temperature [°C] -40…90
    Min. bursting pressure
    600 bar 8700 psi 60 MPa
    Pressure rating
    65 bar 940 psi 6.5 Mpa
    Note on pressure rating
    static
    Vacuum resistance [mbar] -1000
    Type of pressure relative pressure
    MAWP (for applications according to CRN) [bar] 65
    Electrical data
    Operating voltage [V] 18…30 DC
    Current consumption [mA] < 15
    Min. insulation resistance [MΩ] 100; (500 V DC)
    Protection class III
    Reverse polarity protection yes
    Power-on delay time [s] < 0.3
    Inputs / outputs
    Number of inputs and outputs Number of digital outputs: 2
    Outputs
    Total number of outputs 2
    Output signal switching signal; IO-Link; (configurable)
    Electrical design PNP/NPN
    Number of digital outputs 2
    Output function normally open / normally closed; (parameterisable)
    Max. voltage drop switching output DC [V] 2
    Permanent current rating of switching output DC [mA] 100
    Switching frequency DC [Hz] < 170
    Short-circuit protection yes
    Type of short-circuit protection pulsed
    Overload protection yes
    Measuring/setting range
    Measuring range
    -1…25 bar -14.6…362.6 psi -0.1…2.5 MPa
    Set point SP
    -0.75…25 bar -10.8…362.6 psi -0.075…2.5 MPa
    Reset point rP
    -0.87…24.88 bar -12.7…360.8 psi -0.087…2488 MPa
    In steps of
    0.01 bar 0.1 psi 0.001 MPa
    Factory setting
    SP1 = 6.25 bar rP1 = 5.75 bar ou1 = Hno;
    SP2 = 18.75 bar rP2 = 18.25 bar ou2 = Hno;
    dS1/dS2 = 0 ms dr1/dr2 = 0 ms
    coF = 0 % P-n = PnP dAP= 60 ms
    Accuracy / deviations
    Switch point accuracy [% of the span] < ± 0,5 (nach DIN EN 61298-2)
    Repeatability [% of the span] < ± 0,05; (with temperature fluctuations < 10 K)
    Characteristics deviation [% of the span] < ± 0,5 (nach DIN EN 61298-2); (incl. drift when overtightened, zero point and span error, non-linearity, hysteresis)
    Linearity deviation [% of the span] < ± 0,1 (BFSL) / < ± 0,2 (LS)
    Hysteresis deviation [% of the span] < ± 0,2
    Long-term stability [% of the span] < ± 0,1; (per 6 months)
    Temperature coefficient zero point [% of the span / 10 K] < 0,1 (-25…90 °C) / < 0,2 (-40…-25 °C)
    Temperature coefficient span [% of the span / 10 K] < 0,1 (-25…90 °C) / < 0,2 (-40…-25 °C)
    Response times
    Response time [ms] < 3
    Software / programming
    Parameter setting options hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping
    Interfaces
    Communication interface IO-Link
    Transmission type COM2 (38,4 kBaud)
    IO-Link revision 1.1
    SDCI standard IEC 61131-9
    Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
    SIO mode yes
    Required master port type A
    Process data analogue 2
    Process data binary 2
    Min. process cycle time [ms] 5
    Supported DeviceIDs
    Type of operation DeviceID
    Default 854
    Operating conditions
    Ambient temperature [°C] -40…90
    Storage temperature [°C] -40…100
    Protection IP 67; IP 69K
    Mechanical data
    Weight [g] 65.5
    Materials 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI
    Materials (wetted parts) stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630)
    Min. pressure cycles 60 million; (at 1.2 times nominal pressure)
    Tightening torque [Nm] 50; (recommended tightening torque; depends on lubrication, seal and pressure rating)
    Process connection threaded connection 1/4″ NPT external thread internal thread:M5
    Restrictor element integrated yes
    Remarks
    Remarks
    BFSL = Best Fit Straight Line
    LS = limit value setting
    Pack quantity 1 pcs.
    Electrical connection
    Connection Connector: 1 x M12

    Sản phẩm đề xuất

    Cảm biến tiệm cận IFM IGS292
    Cảm biến tiệm cận IFM IGS292
    Cảm biến tiệm cận IFM IG0351
    Cảm biến tiệm cận IFM IG0351
    Bộ điều khiển nhiệt độ IFM TD2537
    Bộ điều khiển nhiệt độ IFM TD2537
    Cảm biến tiệm cận IFM IB0016
    Cảm biến tiệm cận IFM IB0016