| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Process connection | threaded connection G 3/4 internal thread | ||||||||
| Temperature monitoring | |||||||||
| Measuring range |
| ||||||||
| Application | |||||||||
| Special feature | Gold-plated contacts | ||||||||
| Media | Liquids; oil | ||||||||
| Note on media |
| ||||||||
| Medium temperature [°C] | -10…100 | ||||||||
| Pressure rating [bar] | 100 | ||||||||
| Pressure rating [Mpa] | 10 | ||||||||
| Note on pressure rating |
| ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 18…30 DC; (according to EN 50178 SELV/PELV) | ||||||||
| Current consumption [mA] | < 50 | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Power-on delay time [s] | < 3 | ||||||||
| Outputs | |||||||||
| Total number of outputs | 2 | ||||||||
| Output signal | switching signal; analogue signal; frequency signal; IO-Link | ||||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||||
| Max. current load per output [mA] | 150; (200: …60 °C; Ambient temperature; 250: …40 °C; Ambient temperature) | ||||||||
| Analogue current output [mA] | 4…20 | ||||||||
| Max. load [Ω] | 500 | ||||||||
| Short-circuit protection | yes | ||||||||
| Overload protection | yes | ||||||||
| Frequency of the output [Hz] | 0…10000 | ||||||||
| Measuring/setting range | |||||||||
| Measuring range |
| ||||||||
| Display range |
| ||||||||
| Resolution |
| ||||||||
| Set point SP |
| ||||||||
| Reset point rP |
| ||||||||
| Frequency end point, FEP |
| ||||||||
| In steps of |
| ||||||||
| Frequency at the end point FRP [Hz] | 10…10000 | ||||||||
| In steps of [Hz] | 10 | ||||||||
| Measuring dynamics | 1:50 | ||||||||
| Temperature monitoring | |||||||||
| Measuring range |
| ||||||||
| Display range |
| ||||||||
| Resolution |
| ||||||||
| Set point SP |
| ||||||||
| Reset point rP |
| ||||||||
| In steps of |
| ||||||||
| Frequency start point, FSP |
| ||||||||
| Frequency end point, FEP |
| ||||||||
| Frequency at the end point FRP [Hz] | 10…10000 | ||||||||
| Accuracy / deviations | |||||||||
| Flow monitoring | |||||||||
| Accuracy (in the measuring range) | ± 5 % MEW; (Q > 1 l/min; 20…70 °C Medium temperature) | ||||||||
| Repeatability | ± 1 % MEW | ||||||||
| Temperature monitoring | |||||||||
| Temperature drift | 0,029 °C / K | ||||||||
| Accuracy [K] | 3 K (25°C; Q > 1 l/min) | ||||||||
| Response times | |||||||||
| Flow monitoring | |||||||||
| Response time [s] | 0.01 | ||||||||
| Damping for the switching output dAP [s] | 0…5 | ||||||||
| In steps of [s] | 0.1 | ||||||||
| Damping for the analogue output dAA [s] | 0…5 | ||||||||
| In steps of [s] | 0.1 | ||||||||
| Temperature monitoring | |||||||||
| Dynamic response T05 / T09 [s] | T09 = 120 (Q > 1 l/min) | ||||||||
| Software / programming | |||||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/frequency output; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour; calibration factor | ||||||||
| Interfaces | |||||||||
| Communication interface | IO-Link | ||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||
| IO-Link revision | 1.1 | ||||||||
| SDCI standard | IEC 61131-9 CDV | ||||||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||||||
| SIO mode | yes | ||||||||
| Required master port type | A | ||||||||
| Process data analogue | 2 | ||||||||
| Process data binary | 2 | ||||||||
| Min. process cycle time [ms] | 3.2 | ||||||||
| Supported DeviceIDs |
| ||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | 0…60 | ||||||||
| Note on ambient temperature |
| ||||||||
| Storage temperature [°C] | -15…80 | ||||||||
| Protection | IP 65; IP 67 | ||||||||
| Mechanical data | |||||||||
| Weight [g] | 994 | ||||||||
| Materials | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated | ||||||||
| Materials (wetted parts) | stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM | ||||||||
| Process connection | threaded connection G 3/4 internal thread | ||||||||
| Switching cycles mechanical | 10 million | ||||||||
| Displays / operating elements | |||||||||
| Display |
| ||||||||
| Remarks | |||||||||
| Remarks |
| ||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||||||
