| Product characteristics | |||||
|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1 | ||||
| Process connection | M18 x 1,5 internal thread | ||||
| Application | |||||
| Media | Liquids; Gases | ||||
| Medium temperature [°C] | -25…80 | ||||
| Pressure rating [bar] | 300 | ||||
| MAWP (for applications according to CRN) [bar] | 208 | ||||
| Liquids | |||||
| Medium temperature [°C] | -25…80 | ||||
| Gases | |||||
| Medium temperature [°C] | -25…80 | ||||
| Electrical data | |||||
| Operating voltage [V] | 18…36 DC | ||||
| Current consumption [mA] | < 60 | ||||
| Protection class | III | ||||
| Reverse polarity protection | yes | ||||
| Power-on delay time [s] | 10 | ||||
| Inputs / outputs | |||||
| Number of inputs and outputs | Number of digital outputs: 1 | ||||
| Outputs | |||||
| Total number of outputs | 1 | ||||
| Output signal | switching signal; IO-Link; (configurable) | ||||
| Electrical design | PNP | ||||
| Number of digital outputs | 1 | ||||
| Output function | normally open / normally closed; (parameterisable) | ||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||
| Permanent current rating of switching output DC [mA] | 250 | ||||
| Short-circuit protection | yes | ||||
| Type of short-circuit protection | pulsed | ||||
| Overload protection | yes | ||||
| Measuring/setting range | |||||
| Liquids | |||||
| Setting range [cm/s] | 3…300 | ||||
| Greatest sensitivity [cm/s] | 3…100 | ||||
| Gases | |||||
| Setting range [cm/s] | 200…3000 | ||||
| Greatest sensitivity [cm/s] | 200…800 | ||||
| Accuracy / deviations | |||||
| Repeatability [cm/s] | 1…5 | ||||
| Note on repeatability |
| ||||
| Temperature drift [cm/s x 1/K] | 0.1; (for water 5…100 cm/s; 10…70 °C) | ||||
| Temperature gradient [K/min] | 300 | ||||
| Switch point accuracy [cm/s] | ± 2…± 10; (for water 5…100 cm/s; 25 °C; Factory setting) | ||||
| Hysteresis [cm/s] | 2…5; (for water 5…100 cm/s; 25 °C; Factory setting) | ||||
| Response times | |||||
| Liquids | |||||
| Response time [s] | 1…2; (for a temperature gradient: 1 K/min) | ||||
| Gases | |||||
| Response time [s] | 1…10 | ||||
| Software / programming | |||||
| Adjustment of the switch point | pushbutton | ||||
| Interfaces | |||||
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 2 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time [ms] | 3 | ||||
| Supported DeviceIDs |
| ||||
| Operating conditions | |||||
| Ambient temperature [°C] | -25…80 | ||||
| Storage temperature [°C] | -25…100 | ||||
| Protection | IP 65; IP 67 | ||||
| Mechanical data | |||||
| Weight [g] | 248.5 | ||||
| Dimensions [mm] | M18 x 1.5 | ||||
| Thread designation | M18 x 1.5 | ||||
| Materials | stainless steel (1.4404 / 316L); stainless steel (1.4301 / 304); PC; PBT-GF20; EPDM/X | ||||
| Materials (wetted parts) | stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A | ||||
| Process connection | M18 x 1,5 internal thread | ||||
| Displays / operating elements | |||||
| Display |
| ||||
| Remarks | |||||
| Pack quantity | 1 pcs. | ||||
| Electrical connection | |||||
| Connection | Connector: 1 x M12 | ||||
