| Product characteristics | ||||
|---|---|---|---|---|
| Number of inputs and outputs | Number of analogue outputs: 1 | |||
| Measuring range [°C] | -50…200 | |||
| Process connection | diameter Ø 6 mm | |||
| Installation length EL [mm] | 50 | |||
| Application | ||||
| Measuring element | 1 x Pt 1000; (to DIN EN 60751, class A) | |||
| Media | liquids and gases | |||
| Pressure rating [bar] | 160 | |||
| Vacuum resistance [mbar] | -1000 | |||
| Electrical data | ||||
| Operating voltage [V] | 18…32 DC; (“supply class 2” to cULus) | |||
| Current consumption [mA] | < 50 | |||
| Protection class | III | |||
| Reverse polarity protection | yes | |||
| Power-on delay time [s] | 2 | |||
| Inputs / outputs | ||||
| Number of inputs and outputs | Number of analogue outputs: 1 | |||
| Outputs | ||||
| Total number of outputs | 1 | |||
| Output signal | analogue signal; IO-Link; (configurable) | |||
| Number of analogue outputs | 1 | |||
| Analogue current output [mA] | 4…20 | |||
| Max. load [Ω] | 250; ((18…19 V); 19…32 V: 300 Ω) | |||
| Short-circuit protection | yes | |||
| Overload protection | yes | |||
| Measuring/setting range | ||||
| Measuring range [°C] | -50…200 | |||
| Factory setting | 0…200 °C | |||
| Resolution | ||||
| Resolution of analogue output [K] | 0.04 | |||
| Accuracy / deviations | ||||
| Precision analogue output [K] | ± 0,3 + (± 0,1 % MS) | |||
| Temperature coefficient [% of the span / 10 K] | 0,1; (in case of deviation from the reference condition 25 ± 5 °C) | |||
| Response times | ||||
| Dynamic response T05 / T09 [s] | < 0,5 / < 2 | |||
| Interfaces | ||||
| Communication interface | IO-Link | |||
| Transmission type | COM2 (38,4 kBaud) | |||
| IO-Link revision | 1.1 | |||
| Operating conditions | ||||
| Ambient temperature [°C] | -25…80 | |||
| Note on ambient temperature |
| |||
| Storage temperature [°C] | -40…100 | |||
| Protection | IP 67; IP 68; IP 69K | |||
| Mechanical data | ||||
| Weight [g] | 102.5 | |||
| Dimensions [mm] | Ø 18.7 | |||
| Materials | stainless steel (1.4404 / 316L); PEI; FKM | |||
| Materials (wetted parts) | stainless steel (1.4404 / 316L) electropolished | |||
| Process connection | diameter Ø 6 mm | |||
| Surface characteristics Ra/Rz of the wetted parts | Ra: < 0.8 | |||
| Probe diameter [mm] | 6 | |||
| Installation length EL [mm] | 50 | |||
| Remarks | ||||
| Remarks |
| |||
| Pack quantity | 1 pcs. | |||
| Electrical connection | ||||
| Connection | Connector: 1 x M12 | |||
