| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||||||
| Measuring range |
| ||||||||
| Application | |||||||||
| Application | asphalt; coated metal; liquids; glass; rubber; wood; ceramics; plastics; lacquers; food products; paper; fabric | ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 18…32 DC; (to SELV/PELV) | ||||||||
| Current consumption [mA] | < 50 | ||||||||
| Min. insulation resistance [MΩ] | 100; (50 V DC) | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Power-on delay time [s] | < 1 | ||||||||
| Inputs / outputs | |||||||||
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||||||
| Inputs | |||||||||
| Test input | type 3 (IEC 61131-2) | ||||||||
| Outputs | |||||||||
| Total number of outputs | 2 | ||||||||
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | ||||||||
| Electrical design | PNP | ||||||||
| Number of digital outputs | 1 | ||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||||||
| Permanent current rating of switching output DC [mA] | 150 | ||||||||
| Number of analogue outputs | 1 | ||||||||
| Analogue current output [mA] | 4…20 | ||||||||
| Max. load [Ω] | 500 | ||||||||
| Short-circuit protection | yes | ||||||||
| Type of short-circuit protection | pulsed | ||||||||
| Short-circuit proof | yes | ||||||||
| Overload protection | yes | ||||||||
| Detection zone | |||||||||
| Wave length range [µm] | 8…14 | ||||||||
| Measuring/setting range | |||||||||
| Measuring range |
| ||||||||
| Set point SP |
| ||||||||
| Reset point rP |
| ||||||||
| Analogue start point |
| ||||||||
| Analogue end point |
| ||||||||
| In steps of |
| ||||||||
| Resolution | |||||||||
| Resolution of switching output [K] | 0.5 | ||||||||
| Resolution of analogue output [K] | 0.2; (+ 0.03% of the set measuring span) | ||||||||
| Resolution of display [K] | 0.5 | ||||||||
| Accuracy / deviations | |||||||||
| Accuracy [K] | < ± 1 %; (of measured value, min. 2 K (degree of emission = 1, T = 23 °C)) | ||||||||
| Repeatability [K] | 1 | ||||||||
| Response times | |||||||||
| Response time [ms] | 100 | ||||||||
| Software / programming | |||||||||
| Adjustment of the switch point | programming buttons | ||||||||
| Parameter setting options | analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function | ||||||||
| Interfaces | |||||||||
| Communication interface | IO-Link | ||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||
| IO-Link revision | 1.1 | ||||||||
| SDCI standard | IEC 61131-9 | ||||||||
| SIO mode | yes | ||||||||
| Required master port type | A | ||||||||
| Process data analogue | 16 | ||||||||
| Process data binary | 1 | ||||||||
| Min. process cycle time [ms] | 3.6 | ||||||||
| Supported DeviceIDs |
| ||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | 0…65 | ||||||||
| Storage temperature [°C] | -20…80 | ||||||||
| Max. relative air humidity [%] | 95; (non condensing) | ||||||||
| Protection | IP 65 | ||||||||
| Mechanical data | |||||||||
| Weight [g] | 411.5 | ||||||||
| Housing | threaded type | ||||||||
| Dimensions [mm] | M30 x 1.5 | ||||||||
| Thread designation | M30 x 1.5 | ||||||||
| Materials | threaded sleeve: stainless steel (1.4305 / 303); polyester | ||||||||
| Lens material |
| ||||||||
| Displays / operating elements | |||||||||
| Display |
| ||||||||
| Operating elements |
| ||||||||
| Accessories | |||||||||
| Accessories (supplied) |
| ||||||||
| Remarks | |||||||||
| Remarks |
| ||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12 | ||||||||
