| Product characteristics | |||||
|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 2 | ||||
| Measuring range |
| ||||
| Process connection | threaded connection Rc 1/2 internal thread DN10 | ||||
| Application | |||||
| Special feature | Gold-plated contacts | ||||
| Application | for industrial applications | ||||
| Media | water | ||||
| Medium temperature [°C] | -10…90 | ||||
| Pressure rating [bar] | 12 | ||||
| Pressure rating [Mpa] | 1.2 | ||||
| Note on pressure rating |
| ||||
| Electrical data | |||||
| Operating voltage [V] | 18…30 DC | ||||
| Current consumption [mA] | < 30 | ||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||
| Protection class | III | ||||
| Reverse polarity protection | yes | ||||
| Power-on delay time [s] | < 3 | ||||
| Inputs / outputs | |||||
| Number of inputs and outputs | Number of digital outputs: 2 | ||||
| Outputs | |||||
| Total number of outputs | 2 | ||||
| Output signal | switching signal; frequency signal; IO-Link; (configurable) | ||||
| Electrical design | PNP/NPN | ||||
| Number of digital outputs | 2 | ||||
| Output function | normally open / normally closed; (parameterisable) | ||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||
| Permanent current rating of switching output DC [mA] | 100 | ||||
| Short-circuit protection | yes | ||||
| Overload protection | yes | ||||
| Measuring/setting range | |||||
| Measuring range |
| ||||
| Display range |
| ||||
| Resolution |
| ||||
| Set point SP |
| ||||
| Reset point rP |
| ||||
| Frequency end point, FEP |
| ||||
| In steps of |
| ||||
| Frequency at the end point FRP [Hz] | 100…1000 | ||||
| Measuring dynamics | 1:20 | ||||
| Temperature monitoring | |||||
| Measuring range [°C] | -10…90 | ||||
| Display range [°C] | -30…110 | ||||
| Resolution [°C] | 0.5 | ||||
| Set point SP [°C] | -9…90 | ||||
| Reset point rP [°C] | -10…89 | ||||
| In steps of [°C] | 0.5 | ||||
| Frequency start point, FSP [°C] | -10…70 | ||||
| Frequency end point, FEP [°C] | 10…90 | ||||
| Frequency at the end point FRP [Hz] | 100…1000 | ||||
| Accuracy / deviations | |||||
| Flow monitoring | |||||
| Accuracy (in the measuring range) | ± 2 % MEW | ||||
| Repeatability | ± 0,5 % MEW | ||||
| Temperature monitoring | |||||
| Accuracy [K] | ± 1 | ||||
| Response times | |||||
| Flow monitoring | |||||
| Response time [s] | 1; (dAP = 0) | ||||
| Damping for the switching output dAP [s] | 0…5 | ||||
| Temperature monitoring | |||||
| Dynamic response T05 / T09 [s] | T09 = 6 | ||||
| Software / programming | |||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; frequency output; switch-on/switch-off delay; Damping; Display unit | ||||
| Interfaces | |||||
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 2 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time [ms] | 3 | ||||
| Supported DeviceIDs |
| ||||
| Operating conditions | |||||
| Ambient temperature [°C] | 0…60 | ||||
| Note on ambient temperature |
| ||||
| Storage temperature [°C] | -20…80 | ||||
| Protection | IP 65; IP 67 | ||||
| Mechanical data | |||||
| Weight [g] | 441 | ||||
| Materials | stainless steel (1.4404 / 316L); PC; PBT+PC-GF30; PPS; TPE-U | ||||
| Materials (wetted parts) | stainless steel (1.4404 / 316L); ETFE; PA 6T; PPS; FKM | ||||
| Tightening torque [Nm] | 30 | ||||
| Process connection | threaded connection Rc 1/2 internal thread DN10 | ||||
| Remarks | |||||
| Remarks |
| ||||
| Pack quantity | 1 pcs. | ||||
| Electrical connection | |||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||
