You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Số điện thoại : +84868571999 / Chat Zalo

Email: infor@nextcom.asia

Thời gian làm việc: 8:00 - 17:00 (Thứ 2 - Thứ 7)

Tài khoản
    Cảm biến lưu lượng IFM SD0523 16 bar

    Cảm biến lưu lượng IFM SD0523 16 bar

    0₫
    dong-ho-do-khi-nen-ifm-sd0523
    IFM ,
    Thêm giỏ hàng
    Sản phẩm hết hàng
    Product characteristics
    Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
    Measuring range
    0.5…143.9 m/s 8…2110 m³/h 0.12…35.18 m³/min
    Process connection threaded connection G 1 internal thread
    Application
    Installation Adjustable to inside pipe diameters; (38…254 mm)
    Media compressed air
    Medium temperature [°C] 0…60
    Pressure rating [bar] 16
    Pressure rating [Mpa] 1.6
    Pressure rating [psi] 232
    MAWP (for applications according to CRN) [bar] 16
    Electrical data
    Operating voltage [V] 18…30 DC; (according to EN 50178 SELV/PELV)
    Current consumption [mA] < 110
    Protection class III
    Reverse polarity protection yes
    Power-on delay time [s] 1
    Inputs / outputs
    Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
    Outputs
    Total number of outputs 2
    Output signal switching signal; analogue signal; pulse signal; IO-Link; (configurable)
    Electrical design PNP
    Number of digital outputs 2
    Output function normally open / normally closed; (parameterisable)
    Max. voltage drop switching output DC [V] 2
    Permanent current rating of switching output DC [mA] 250; (per output)
    Number of analogue outputs 1
    Analogue current output [mA] 4…20; (scalable)
    Max. load [Ω] 500
    Pulse output consumed quantity meter
    Short-circuit protection yes
    Type of short-circuit protection pulsed
    Overload protection yes
    Measuring/setting range
    Measuring range Measuring/setting range; Flow monitoring; The values apply at: Ø 72 mm
    Measuring range
    0.5…143.9 m/s 8…2110 m³/h 0.12…35.18 m³/min
    Display range
    0…172.7 m/s 0…2532 m³/h 0…42.22 m³/min
    Resolution
    0.1 m/s 2 m³/h 0.02 m³/min
    Set point SP
    1.2…143.9 m/s 18…2110 m³/h 0.28…35.18 m³/min
    Reset point rP
    0.5…143.2 m/s 6…2100 m³/h 0.12…35 m³/min
    Analogue start point ASP
    0…107.9 m/s 0…1582 m³/h 0…26.38 m³/min
    Analogue end point AEP
    36…143.9 m/s 528…2110 m³/h 8.8…35.18 m³/min
    In steps of
    0.1 m/s 2 m³/h 0.02 m³/min
    Volumetric flow quantity monitoring
    Pulse value 1…1000 x 10³
    In steps of 1 Nm³
    Pulse length [s] 0,7…2 (D = 72 mm)
    Temperature monitoring
    Measuring range [°C] 0…60
    Display range [°C] -12…72
    Resolution [°C] 0.2
    Set point SP [°C] 0.4…60
    Reset point rP [°C] 0.2…59.8
    Analogue start point [°C] 0…45
    Analogue end point [°C] 15…60
    In steps of [°C] 0.2
    Accuracy / deviations
    Flow monitoring
    Repeatability [% of the measured value] ± 1,5
    Accuracy (in the measuring range) ± (6 % MW + 0,6 % MEW); (D = 72mm, T = 22 °C; standard volume flow: 50…850 Nm³/h)
    Temperature monitoring
    Accuracy [K] ± 2,5 (Q > 2 Nm³/h)
    Response times
    Flow monitoring
    Response time [s] 0.1; (dAP = 0)
    Damping for the switching output dAP in steps [s] 0 – 0,2 – 0,4 – 0,6 – 0,8 – 1
    Temperature monitoring
    Dynamic response T05 / T09 [s] 30 (Q > 2 Nm³/h)
    Software / programming
    Parameter setting options Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser
    Interfaces
    Communication interface IO-Link
    Transmission type COM2 (38,4 kBaud)
    IO-Link revision 1.1
    SDCI standard IEC 61131-9
    Profiles Smart Sensor: Process Data Variable; Device Identification
    SIO mode yes
    Required master port type A
    Process data analogue 3
    Process data binary 2
    Min. process cycle time [ms] 5
    Supported DeviceIDs
    Type of operation DeviceID
    Default 381
    Operating conditions
    Ambient temperature [°C] 0…60
    Storage temperature [°C] -20…85
    Max. relative air humidity [%] 90
    Protection IP 65
    Mechanical data
    Weight [g] 442
    Materials PBT-GF20; PC; stainless steel (1.4301 / 304); FKM
    Materials (wetted parts) stainless steel (1.4401 / 316); stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM
    Process connection threaded connection G 1 internal thread
    Displays / operating elements
    Display
    Display unit 4 x LED, green (Nm³/min, Nm³/h, Nm³, °C)
    function display 1 x LED, green
    switching status 2 x LED, yellow
    measured values alphanumeric display, 4-digit
    programming alphanumeric display, 4-digit
    Remarks
    Remarks
    Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533.
    D = inside pipe diameter
    Pack quantity 1 pcs.
    Electrical connection
    Connection Connector: 1 x M12

    Sản phẩm đề xuất

    Cảm biến tiệm cận IFM I15005
    Cảm biến tiệm cận IFM I15005
    IFM ZZ1102
    IFM ZZ1102
    Cảm biến tiệm cận IFM IFR212
    Cảm biến tiệm cận IFM IFR212
    Cảm biến tiệm cận IFM IFT259
    Cảm biến tiệm cận IFM IFT259