| Product characteristics | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||||||
| Process connection | threaded connection G 1/4 DN8 | ||||||||||
| Ar | |||||||||||
| Measuring range [m³/h] | 0.08…24.04 | ||||||||||
| CO2 | |||||||||||
| Measuring range [m³/h] | 0.04…14.36 | ||||||||||
| N2 | |||||||||||
| Measuring range [m³/h] | 0.04…15 | ||||||||||
| Application | |||||||||||
| Application | for industrial applications | ||||||||||
| Media | Argon (Ar); carbon dioxide (CO2); nitrogen (N2) | ||||||||||
| Medium temperature [°C] | 0…60 | ||||||||||
| Pressure rating [bar] | 16 | ||||||||||
| Pressure rating [Mpa] | 1.6 | ||||||||||
| Electrical data | |||||||||||
| Operating voltage [V] | 18…30 DC; (according to EN 50178 SELV/PELV) | ||||||||||
| Current consumption [mA] | < 100 | ||||||||||
| Protection class | III | ||||||||||
| Reverse polarity protection | yes | ||||||||||
| Power-on delay time [s] | 1 | ||||||||||
| Inputs / outputs | |||||||||||
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||||||
| Outputs | |||||||||||
| Total number of outputs | 2 | ||||||||||
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; (configurable) | ||||||||||
| Electrical design | PNP | ||||||||||
| Number of digital outputs | 2 | ||||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||||||
| Permanent current rating of switching output DC [mA] | 250; (per output) | ||||||||||
| Number of analogue outputs | 1 | ||||||||||
| Analogue current output [mA] | 4…20; (scalable) | ||||||||||
| Max. load [Ω] | 500 | ||||||||||
| Pulse output | consumed quantity meter | ||||||||||
| Short-circuit protection | yes | ||||||||||
| Type of short-circuit protection | pulsed | ||||||||||
| Overload protection | yes | ||||||||||
| Measuring/setting range | |||||||||||
| Low flow cut-off LFC [m³/h] | < 0.26 | ||||||||||
| Measuring dynamics | 1:300 | ||||||||||
| Ar | |||||||||||
| Measuring range [m³/h] | 0.08…24.04 | ||||||||||
| Display range [m³/h] | 0…28.84 | ||||||||||
| Resolution [m³/h] | 0.02 | ||||||||||
| Set point SP [m³/h] | 0.22…24.04 | ||||||||||
| Reset point rP [m³/h] | 0.12…23.94 | ||||||||||
| Analogue start point ASP [m³/h] | 0…19.24 | ||||||||||
| Analogue end point AEP [m³/h] | 4.8…24.04 | ||||||||||
| In steps of [m³/h] | 0.02 | ||||||||||
| CO2 | |||||||||||
| Measuring range [m³/h] | 0.04…14.36 | ||||||||||
| Display range [m³/h] | 0…17.24 | ||||||||||
| Resolution [m³/h] | 0.02 | ||||||||||
| Set point SP [m³/h] | 0.14…14.36 | ||||||||||
| Reset point rP [m³/h] | 0.08…14.3 | ||||||||||
| Analogue start point ASP [m³/h] | 0…11.48 | ||||||||||
| Analogue end point AEP [m³/h] | 2.88…14.36 | ||||||||||
| In steps of [m³/h] | 0.02 | ||||||||||
| Volumetric flow quantity monitoring | |||||||||||
| Pulse value | 0.001…1 000 000 m³ | ||||||||||
| In steps of | 0.001…1000 m³ | ||||||||||
| Pulse length [s] | 0,062…2 | ||||||||||
| N2 | |||||||||||
| Measuring range [m³/h] | 0.04…15 | ||||||||||
| Display range [m³/h] | 0…18 | ||||||||||
| Resolution [m³/h] | 0.02 | ||||||||||
| Set point SP [m³/h] | 0.14…15 | ||||||||||
| Reset point rP [m³/h] | 0.08…14.94 | ||||||||||
| Analogue start point ASP [m³/h] | 0…12 | ||||||||||
| Analogue end point AEP [m³/h] | 3…15 | ||||||||||
| In steps of [m³/h] | 0.02 | ||||||||||
| Temperature monitoring | |||||||||||
| Measuring range [°C] | 0…60 | ||||||||||
| Display range [°C] | -12…72 | ||||||||||
| Resolution [°C] | 0.2 | ||||||||||
| Set point SP [°C] | 0.4…60 | ||||||||||
| Reset point rP [°C] | 0…59.8 | ||||||||||
| Analogue start point [°C] | 0…48 | ||||||||||
| Analogue end point [°C] | 12…60 | ||||||||||
| In steps of [°C] | 0.2 | ||||||||||
| Accuracy / deviations | |||||||||||
| Flow monitoring | |||||||||||
| Repeatability [% of the measured value] | ± 1,5 | ||||||||||
| Accuracy (in the measuring range) | ± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533) | ||||||||||
| Temperature monitoring | |||||||||||
| Accuracy [K] | ± 2; (medium flow in the limit area of the flow measurement range) | ||||||||||
| Response times | |||||||||||
| Flow monitoring | |||||||||||
| Response time [s] | 0.1; (dAP = 0) | ||||||||||
| Damping for the switching output dAP in steps [s] | 0 – 0,2 – 0,4 – 0,6 – 0,8 – 1 | ||||||||||
| Software / programming | |||||||||||
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection | ||||||||||
| Interfaces | |||||||||||
| Communication interface | IO-Link | ||||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||||
| IO-Link revision | 1.1 | ||||||||||
| SDCI standard | IEC 61131-9 | ||||||||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||||||||
| SIO mode | yes | ||||||||||
| Required master port type | A | ||||||||||
| Process data analogue | 3 | ||||||||||
| Process data binary | 2 | ||||||||||
| Min. process cycle time [ms] | 4.1 | ||||||||||
| Supported DeviceIDs |
| ||||||||||
| Operating conditions | |||||||||||
| Ambient temperature [°C] | 0…60 | ||||||||||
| Storage temperature [°C] | -20…85 | ||||||||||
| Max. relative air humidity [%] | 90 | ||||||||||
| Protection | IP 65 | ||||||||||
| Mechanical data | |||||||||||
| Weight [g] | 981 | ||||||||||
| Materials | PBT-GF20; PC; PC; stainless steel (1.4301 / 304); FKM | ||||||||||
| Materials (wetted parts) | stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM; aluminium anodised | ||||||||||
| Process connection | threaded connection G 1/4 DN8 | ||||||||||
| Displays / operating elements | |||||||||||
| Display |
| ||||||||||
| Display unit | Nl/min; Nm³/h; Nm³; °C | ||||||||||
| Remarks | |||||||||||
| Remarks |
| ||||||||||
| Pack quantity | 1 pcs. | ||||||||||
| Electrical connection | |||||||||||
| Connection | Connector: 1 x M12 | ||||||||||
