| Product characteristics | ||
|---|---|---|
| Resolution | 1…10000; (parameterisable; Factory setting: 1024) resolution | |
| Communication interface | IO-Link | |
| Shaft design | hollow shaft open to one side | |
| Shaft diameter [mm] | 6 | |
| Application | ||
| Function principle | incremental | |
| Detection system | magnetic | |
| Electrical data | ||
| Operating voltage [V] | 4.75…30 DC | |
| Current consumption [mA] | < 150 | |
| Protection class | III | |
| Reverse polarity protection | yes | |
| Power-on delay time [s] | 0.5 | |
| Max. revolution electrical [U/min] | 12000 | |
| Outputs | ||
| Electrical design | HTL/TTL | |
| Switching frequency [kHz] | 1000 | |
| Factory setting |
| |
| Short-circuit protection | yes | |
| Phase difference A and B [°] | 90 | |
| Measuring/setting range | ||
| Resolution | 1…10000; (parameterisable; Factory setting: 1024) resolution | |
| Accuracy / deviations | ||
| Accuracy [°] | 0.1 | |
| Software / programming | ||
| Parameter setting options | Resolution; direction of rotation; HTL; TTL | |
| Interfaces | ||
| Communication interface | IO-Link | |
| Transmission type | COM2 (38,4 kBaud) | |
| IO-Link revision | 1.1 | |
| SIO mode | yes | |
| Min. process cycle time [ms] | 2.3 | |
| Operating conditions | ||
| Ambient temperature [°C] | -40…85 | |
| Storage temperature [°C] | -40…85 | |
| Max. relative air humidity [%] | 95; (condensation not permissible) | |
| Protection | IP 65; IP 66; (on the housing: IP 67; on the shaft: IP 64) | |
| Mechanical data | ||
| Weight [g] | 267 | |
| Dimensions [mm] | Ø 36.5 / L = 58.5 | |
| Materials | flange: aluminium; housing: stainless steel (1.4521 / 444); plug: stainless steel (1.4401 / 316) | |
| Tightening torque [Nm] | < 0.7; (Mounting screw) | |
| Max. revolution, mechanical [U/min] | 12000 | |
| Max. starting torque [Nm] | 1 | |
| Reference temperature torque [°C] | 20 | |
| Shaft design | hollow shaft open to one side | |
| Shaft diameter [mm] | 6 | |
| Shaft material |
| |
| Installation depth of shaft [mm] | 18 | |
| Max. axial shaft misalignment [mm] | 0,5 | |
| Electrical connection | ||
| IO-Link | Connector: 1 x M12, radial, can also be used axially; Moulded body: stainless steel (1.4401 / 316) | |
