| Product characteristics | ||
|---|---|---|
| Resolution | 8192 steps; 4096 revolutions; 25 bit | |
| Communication interface | DeviceNet | |
| Shaft design | solid shaft | |
| Shaft diameter [mm] | 10 | |
| Application | ||
| Function principle | absolute | |
| Revolution type | multiturn | |
| Electrical data | ||
| Operating voltage [V] | 10…30 DC | |
| Current consumption [mA] | 230; ((10 V DC); 100 (24 V DC)) | |
| Reverse polarity protection | yes | |
| Outputs | ||
| Short-circuit protection | yes | |
| Code | binary | |
| Measuring/setting range | ||
| Resolution | 8192 steps; 4096 revolutions; 25 bit | |
| Software / programming | ||
| Parameter setting options | resolution per revolution; total resolution; direction of rotation; preset value; Type of operation; MAC ID; Baud rate | |
| Addressing | address selector switch; 0…99; terminating resistor | |
| Interfaces | ||
| Communication interface | DeviceNet | |
| DeviceNet | ||
| Protocol | CIP (Common Industrial Protocol) | |
| Operating conditions | ||
| Ambient temperature [°C] | -40…85 | |
| Max. relative air humidity [%] | 98 | |
| Protection | IP 67 | |
| Mechanical data | ||
| Weight [K40] | 592 | |
| Dimensions [mm] | Ø 58 / L = 110 | |
| Materials | housing cap: aluminium; housing: steel | |
| Max. revolution, mechanical [U/min] | 12000 | |
| Shaft design | solid shaft | |
| Shaft diameter [mm] | 10 | |
| Shaft material |
| |
| Max. shaft load axial (at the shaft end) [N] | 40 | |
| Max. shaft load radial (at the shaft end) [N] | 110 | |
| Fixing flange | clamping flange | |
| Electrical connection | ||
| terminal strip in the terminal chamber: | ||
