| Product characteristics | |||||||
|---|---|---|---|---|---|---|---|
| Resolution | 4096 steps; 4096 revolutions; 24 bit | ||||||
| Communication interface | CAN | ||||||
| Shaft design | solid shaft | ||||||
| Shaft diameter [mm] | 10 | ||||||
| Application | |||||||
| Function principle | absolute | ||||||
| Revolution type | multiturn | ||||||
| Electrical data | |||||||
| Operating voltage [V] | 9…30 DC; (“supply class 2” to cULus) | ||||||
| Current consumption [mA] | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | ||||||
| Protection class | III | ||||||
| Reverse polarity protection | yes | ||||||
| Outputs | |||||||
| Short-circuit protection | yes | ||||||
| Code | binary | ||||||
| Measuring/setting range | |||||||
| Resolution | 4096 steps; 4096 revolutions; 24 bit | ||||||
| Accuracy / deviations | |||||||
| Accuracy [°] | 0.08 | ||||||
| Software / programming | |||||||
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID | ||||||
| Interfaces | |||||||
| Communication interface | CAN | ||||||
| CAN | |||||||
| Protocol | CANopen | ||||||
| Factory settings |
| ||||||
| Version | DSP – 406 V3.1; DS 301 V4.02; DS 306 V2.0 | ||||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -40…85 | ||||||
| Protection | IP 68; IP 69K | ||||||
| Mechanical data | |||||||
| Weight [g] | 234 | ||||||
| Dimensions [mm] | Ø 36.5 / L = 100 | ||||||
| Materials | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | ||||||
| Max. revolution, mechanical [U/min] | 6000 | ||||||
| Max. starting torque [Nm] | 5 | ||||||
| Reference temperature torque [°C] | 20 | ||||||
| Shaft design | solid shaft | ||||||
| Shaft diameter [mm] | 10 | ||||||
| Shaft material |
| ||||||
| Max. shaft load axial (at the shaft end) [N] | 180 | ||||||
| Max. shaft load radial (at the shaft end) [N] | 180 | ||||||
| Fixing flange | synchro-flange | ||||||
| Displays / operating elements | |||||||
| Display |
| ||||||
| Electrical connection | |||||||
| Connector: 1 x M12, axial | |||||||
