| Product characteristics | |||
|---|---|---|---|
| Resolution | 4096 steps; 4096 revolutions; 24 bit | ||
| Communication interface | CAN | ||
| Shaft design | solid shaft | ||
| Shaft diameter [mm] | 10 | ||
| Application | |||
| Function principle | absolute | ||
| Revolution type | multiturn | ||
| Electrical data | |||
| Operating voltage [V] | 9…30 DC | ||
| Current consumption [mA] | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | ||
| Protection class | III | ||
| Reverse polarity protection | yes | ||
| Outputs | |||
| Output function | CANopen interface | ||
| Short-circuit protection | yes | ||
| Code | binary | ||
| Measuring/setting range | |||
| Resolution | 4096 steps; 4096 revolutions; 24 bit | ||
| Accuracy / deviations | |||
| Accuracy [°] | 0.08 | ||
| Software / programming | |||
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID | ||
| Interfaces | |||
| Communication interface | CAN | ||
| Number of CAN interfaces | 1 | ||
| CAN | |||
| Protocol | CANopen | ||
| Factory settings |
| ||
| Version | DSP – 406 V3.1; DS 301 V4.02; DS 306 V2.0 | ||
| Terminating resistor | yes | ||
| Operating conditions | |||
| Ambient temperature [°C] | -40…85 | ||
| Protection | IP 68; IP 69K | ||
| Mechanical data | |||
| Weight [g] | 228.2 | ||
| Dimensions [mm] | Ø 36.5 / L = 100 | ||
| Materials | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | ||
| Max. revolution, mechanical [U/min] | 6000 | ||
| Max. starting torque [Nm] | 5 | ||
| Reference temperature torque [°C] | 20 | ||
| Shaft design | solid shaft | ||
| Shaft diameter [mm] | 10 | ||
| Shaft material |
| ||
| Max. shaft load axial (at the shaft end) [N] | 180 | ||
| Max. shaft load radial (at the shaft end) [N] | 180 | ||
| Fixing flange | synchro-flange | ||
| Electrical connection | |||
| Connector: 1 x M12, axial | |||
