| Product characteristics | |||||||
|---|---|---|---|---|---|---|---|
| Resolution | 8192 steps; 13 bit | ||||||
| Communication interface | CAN | ||||||
| Shaft design | solid shaft | ||||||
| Shaft diameter [mm] | 10 | ||||||
| Application | |||||||
| Function principle | absolute | ||||||
| Revolution type | singleturn | ||||||
| Electrical data | |||||||
| Operating voltage [V] | 10…30 DC | ||||||
| Current consumption [mA] | 100; ((10 V DC); 60 (24 V DC)) | ||||||
| Reverse polarity protection | yes | ||||||
| Outputs | |||||||
| Code | binary | ||||||
| Measuring/setting range | |||||||
| Resolution | 8192 steps; 13 bit | ||||||
| Software / programming | |||||||
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID | ||||||
| Addressing | address selector switch; 0…126 | ||||||
| Interfaces | |||||||
| Communication interface | CAN | ||||||
| Factory settings |
| ||||||
| CAN | |||||||
| Protocol | CANopen; DSP – 406 V3.1; DS 301 V4.02; DS 306 V2.0 | ||||||
| Factory settings |
| ||||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -40…85 | ||||||
| Max. relative air humidity [%] | 98 | ||||||
| Protection | IP 65; (on the housing: IP 65; on the shaft: IP 64) | ||||||
| Mechanical data | |||||||
| Weight [g] | 555 | ||||||
| Dimensions [mm] | Ø 58 / L = 99 | ||||||
| Materials | aluminium | ||||||
| Max. revolution, mechanical [U/min] | 12000 | ||||||
| Shaft design | solid shaft | ||||||
| Shaft diameter [mm] | 10 | ||||||
| Shaft material |
| ||||||
| Max. shaft load axial (at the shaft end) [N] | 40 | ||||||
| Max. shaft load radial (at the shaft end) [N] | 110 | ||||||
| Fixing flange | clamping flange | ||||||
| Displays / operating elements | |||||||
| Display |
| ||||||
| Electrical connection | |||||||
| terminal strip in the terminal chamber: | |||||||
