| Product characteristics | |||||||
|---|---|---|---|---|---|---|---|
| Resolution | 1…10000; (parameterisable; Factory setting: 1024) resolution | ||||||
| Communication interface | IO-Link | ||||||
| Shaft design | solid shaft | ||||||
| Shaft diameter [mm] | 6 | ||||||
| Application | |||||||
| Function principle | incremental | ||||||
| Detection system | magnetic | ||||||
| Application | encoder; Speed monitor; counter | ||||||
| Electrical data | |||||||
| Operating voltage [V] | 4.75…30 DC | ||||||
| Current consumption [mA] | < 350 | ||||||
| Protection class | III | ||||||
| Reverse polarity protection | yes | ||||||
| Max. revolution electrical [U/min] | 12000 | ||||||
| Outputs | |||||||
| Electrical design | HTL/TTL | ||||||
| Switching frequency [kHz] | 1000 | ||||||
| Factory setting |
| ||||||
| Short-circuit protection | yes | ||||||
| Phase difference A and B [°] | 90 | ||||||
| Measuring/setting range | |||||||
| Resolution | 1…10000; (parameterisable; Factory setting: 1024) resolution | ||||||
| Speed monitor | |||||||
| Set point SP [U/min] | -9994…9999 | ||||||
| Set point SP [Hz] | -166.6…166.7 | ||||||
| Reset point rP [U/min] | -9999…9994 | ||||||
| Reset point rP [Hz] | -166.7…166.6 | ||||||
| Counter | |||||||
| Preset point | 1…9999 | ||||||
| Accuracy / deviations | |||||||
| Accuracy [°] | 0.1 | ||||||
| Software / programming | |||||||
| Parameter setting options | encoder; Resolution; direction of rotation; HTL; TTL; Speed monitor; Resolution | ||||||
| Interfaces | |||||||
| Communication interface | IO-Link | ||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||
| IO-Link revision | 1.1 | ||||||
| SIO mode | yes | ||||||
| Min. process cycle time [ms] | 2.3 | ||||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -40…85 | ||||||
| Storage temperature [°C] | -40…85 | ||||||
| Max. relative air humidity [%] | 95; (condensation not permissible) | ||||||
| Protection | IP 65; (on the housing: IP 67; on the shaft: IP 64) | ||||||
| Mechanical data | |||||||
| Weight [K40] | 437 | ||||||
| Dimensions [mm] | Ø 58 / L = 64 | ||||||
| Materials | flange: aluminium; housing: stainless steel; plug: stainless steel; display window: PEI | ||||||
| Max. revolution, mechanical [U/min] | 12000 | ||||||
| Max. starting torque [Nm] | 1 | ||||||
| Reference temperature torque [°C] | 20 | ||||||
| Shaft design | solid shaft | ||||||
| Shaft diameter [mm] | 6 | ||||||
| Shaft material |
| ||||||
| Max. shaft load axial (at the shaft end) [N] | 40 | ||||||
| Max. shaft load radial (at the shaft end) [N] | 60 | ||||||
| Fixing flange | synchro-flange | ||||||
| Displays / operating elements | |||||||
| Display |
| ||||||
| Electrical connection | |||||||
| IO-Link | Connector: 1 x M12, radial, can also be used axially; Moulded body: stainless steel; Maximum cable length: 100 m; (IO-Link: max. 20 m) | ||||||
